Table of Contents

OpenGear Gator Toolbox-2-r4

The OpenGear Gator Toolbox-2-r4 is a UHD signal conversion problem solver.

This connector retrieves information from the device via SNMP. It displays basic information about the device, as well as the current status of various device components such as the fan door, power supply, and PSU.

About

Version Info

Range Key Features Based on System Impact
1.0.0.x [SLC Main] Initial version - -

Product Info

Range Supported Firmware
1.0.0.x Rev 7

System Info

Range DCF Integration Cassandra Compliant Linked Components Exported Components
1.0.0.x No Yes - -

Configuration

Connections

SNMP Main connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

  • IP address/host: The polling IP of the device.

SNMP Settings:

  • Port number: 161
  • Get community string: public
  • Set community string: private

Web Interface

The web interface is only accessible when the client machine has network access to the product.

How to use

The element consists of the following data pages:

  • General: Displays general parameters such as the device name, IP addresses, and number of active slots.
  • Frame: Displays general parameters of the device frame such as the supplier, serial number, and MAC address.
  • Hardware: Displays information about the frame hardware, such as the current and voltage readings and the fan speed.
  • Power: Displays power-related details for PSU 1 and 2, alongside temperature and power consumption information for the device.
  • Setup: Allows you to view and configure the settings for certain faults.
  • Data Safe: Displays the frame's card instances and details. Also allows you to mask the data safe warning.
  • Frame Glow: Displays the current LED settings of the device, and allows you to configure settings such as LED mode and theme.
  • Alarms: Displays the device's current PSU 1 power, PSU 2 power, and hardware status.
Improve this page