Open Broadcast Systems C Series Encoder
The OBE C-100 and C-200 encoder support high-quality, low-latency news, sports and channel contribution.
This connector uses an SNMP connection to monitor the OBE C-100 and C-200 encoder devices.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- IP port: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device. The default value is public.
- Set community string: The community string used when setting values on the device. The default value is private.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element created with this connector consists of the following pages:
- General: Allows you to specify which device (C-100 or C-200) you are connected with. Also displays general system information.
- Dashboard: Displays a tree view that shows the content of the other pages in a tree structure for increased accessibility.
- Alerts: Displays the traps sent by the selected device.
- Encoder: Contains a table listing all the encoders available in the device.
- Input/Video/Audio/Ancillary Data/Multiplexing/Output: These pages display the collected information in table format. Each row is directly related to one encoder from the Encoder table.