PBI DCH-5220P
The PBI DCH-5220P is an IRD. It has several options, the most important being the type of tuner (DVB-C, DVB-T/T2, DVB-C, DTMB, etc.).
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 5220PR2001 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
The connector uses SNMP commands to communicate with the device. The connector layout generally corresponds with that of the web interface of the device.
The first part of a page corresponds with the top level of the web interface (Status, Configuration, System). The second part corresponds with the relevant subsection (e.g., Status - Decoder, Configuration - DVB-S2 Tuner, System - Device).
Note: The settings for the different types of tuner are only displayed when that particular type of tuner is installed. For example, if a DVB-C tuner is available instead of a DVB-S2 Tuner, the page for the tuner that will be shown is Configuration - DVB-C Tuner.