Pixel Power Clarity
This connector allows the user to view a report for each Clarity, describing the status of the loaded job and of any pending jobs.
About
The connector presents its information in two tables, the System Table and the Clarity Table. There, you will find information about the overall status that can be used as a top-level indicator of whether or not there are any issues within the system. The data of these tables is polled via SNMP protocol every 10 seconds.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | SKY22 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
SNMP Main connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device e.g., 10.10.250.150
- Device address: Not required.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
System
This page displays the System Table, which shows the Index, Name and Status for each detected system.
Clarity
This page displays the Clarity Table. This table shows the Index, System Index, Name, Overall Status, Connection Status, Pending Job Status, Pending Job Name, Pending Job Load Time, Missed Event Status, Missed Event ID, Missing Event Status and Missing Event ID for each Clarity detected. The index of a specific Clarity entry consists of [Index (System Table)].[Index (Clarity Table)]. You can find the System Status on the System page mentioned above.