Powersoft Ottocanali 4K4 DSP+D
The Ottocanali 4K4 is a flexible and reliable 8-channel power amplifiers with up to a total of 4,000 W at 4ê, ideal for multi-zone applications in small to mid-scale installs. It supports any combination of lo-Z loudspeakers, mono-bridgeable channel pairs and 70V/100V Hi-Z distributed lines with no need for output step-up transformers. It features switchable main/aux signal inputs and offers a wide range of system control, alarms, GPI/O and monitoring functions as well as sound shaping options.
About
Protocol to monitor Ottocanali 4K4 8-channel power amplifiers, that uses a Serial connection. It is also required the Local IP Port as 61001 (set by default).
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial Version | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | 1.7.6.36 |
Installation and configuration
Creation
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
- Direct connection:
- Baudrate: Baudrate specified in the manual of the device.
- Databits: Databits specified in the manual of the device.
- Stopbits: Stopbits specified in the manual of the device.
- Parity: Parity specified in the manual of the device.
- FlowControl: FlowControl specified in the manual of the device.
- Interface connection:
- IP address/host: The polling IP of the device.
- IP port: The IP port of the device.
- Local IP port: The IP port of the element that connects to the device.
Usage
General
General device information (e.g.: Name, Serial number, etc.).
Alarms
This page displays Channels and device internals parameter status alarms.
Channel-1
Contains Channel 1 status alarms, as well as channel configuration parameters.
Channel-2
Contains Channel 2 status alarms, as well as channel configuration parameters.
Channel-3
Contains Channel 3 status alarms, as well as channel configuration parameters.
Channel-4
Contains Channel 4 status alarms, as well as channel configuration parameters.
Channel-5
Contains Channel 5 status alarms, as well as channel configuration parameters.
Channel-6
Contains Channel 6 status alarms, as well as channel configuration parameters.
Channel-7
Contains Channel 7 status alarms, as well as channel configuration parameters.
Channel-8
Contains Channel 8 status alarms, as well as channel configuration parameters.
Web Interface
Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.