Pro-Bel Basic Router SNMP
This connector is used to monitor and control a Pro-Bel router device.
About
This connector is used to monitor and control matrix devices from the vendor Pro-Bel. The maximum supported size is 256 inputs and 256 outputs, but the size is automatically adjusted according to the device dimensions.
The SNMP protocol is used to retrieve information from the device.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | Yes |
| 1.1.0.x | Name changed to Basic Router (old name: Sirius Router) | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.1.0.x | SNMP agent ver 3.04 |
Installation and configuration
Creation
SNMP Main connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
Matrix
This page displays the matrix control.
Matrix Settings
On this page, you can change all outputs that use input A to input B, in one bulk operation.
General
This page contains general information about the device.
Web Interface
This page displays the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.