Quintech Matrix SNMP
This connector allows you to view and control the Quintech matrix crosspoints.
About
This connector uses an SNMP connection to display information on a Quintech matrix and allows the user to configure the matrix.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version. | No | Yes |
| 1.1.0.x | Updated to support new firmware. | No | Yes |
Supported Firmware Versions
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | 7.5.9:2201 |
| 1.1.0.x | 7.5.9:2201 |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device, e.g., 172.19.19.30.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
General Page
This page displays system information.
Multiple page buttons are available:
- SNMP: Opens a subpage with SNMP parameters.
- QPE: Opens a subpage with QPE parameters.
- UI: Opens a subpage with user parameters.
Matrix Page
This page displays the SNMP matrix.
Modules Page
This page displays two tables:
- Modules: This table lists the modules that are currently present in the system and also provides matrix information such as inputs and outputs, max/min inputs and outputs and gain parameters.
- Module Status Info: This table lists the statuses of the modules that are currently present in the system, such as the status of the fans, CPU, temperature, PS1/PS2, etc.