Quintech Xtreme 32
The Quintech Xtreme 32 is a dual band matrix switching system featuring 32 ports in a compact 1 RU chassis. The system is a full fan-out, non-blocking signal management solution that routes an input to any or all outputs.
About
This is an SNMPv2 connector that can be used to monitor and configure the Quintech Xtreme 32 matrix switching systems.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2.15.15 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | No | - | - |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device.
- Get community string: The community string used when reading values from the device.
- Set community string: The community string used when setting values on the device
Usage
General
This page contains general information about the device, such as the Model, Model Number, Protocol Version, Number of Inputs, Number of Outputs, etc.
Crosspoints
This page contains a matrix component that displays the actual crosspoints and allows you to connect and disconnect inputs and outputs, change labels and lock or unlock certain rows and columns.
Inputs
This page contains the Inputs Table. For each input, this table displays the following parameters: Name, Lock Status, Connected Output (for the QXF Model), Gain and RF Level.
Outputs
This page contains the Outputs Table. For each output, this table displays the following parameters: Name, Lock Status, Connected Input (for the QXM Model), Gain, RF Level and AGC Model.
Configuration
This page contains configuration parameters such as IP Address, Gateway, Netmask, SNMP credentials, etc.
Status
This page contains the following tables:
- System Modules Table: Lists all the modules installed in the system. For each module, the Type, Address, Inputs, Outputs, Output Gain, etc. are displayed.
- System Status Table: Lists status parameters for all the modules installed in the system, such as Type, Address, Fan, CPU, Temperature, PSU, etc.
Web Interface
This page provides access to the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.