RTS Intercoms ADAM-M AIO
This connector is designed to monitor and configure a mid-size modular matrix intercom, with 128+ ports in a compact 3RU (rack unit) package and full redundancy of the master controllers and power supplies. The matrix frame supports all current ADAM cards, including AIO-16, RVON-16, MADI-16 Plus, Tribus and MCII-e controllers. It also supports existing ADAM wiring schemes and options. The chassis plugs-and-plays anywhere, running on 90 to 264 Vac at 50/60 Hz.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2.9.2.r1.588 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 161).
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.