Table of Contents

RevGo BUC

About

This connector integrates the RevGo BUC device into DataMiner, providing monitoring of RF performance, device health, alarms, and configuration settings via SNMP.

Configuration

Connections

SNMP Connection – RevGo BUC

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

  • IP address/host: The IP address of the device.

SNMP Settings:

  • Port number: Default 161.
  • Get community string: Typically public.
  • Set community string: Typically private.

Web Interface

The web interface is only accessible when the client machine has network access to the product.

How to Use

General Page

This page provides system and network information:

  • Firmware Version
  • Hardware Version
  • Device Name
  • Runtime
  • Number
  • System Description
  • System Contact
  • System Location
  • IP Address
  • IP Mask
  • IP Gateway

Device Status Page

This page provides real-time operational metrics:

  • Input Power
  • RF Power
  • BUC Gain
  • Mute Status
  • Fan Speeds (Fan 1–4)
  • Redundancy State
  • ALC State
  • Current Band
  • ALC Target Power
  • Temperature
  • Device Clock Reference
  • ALC Offset
  • Redundancy Type

The Restart button on this page triggers a device reboot. Use this button with caution.

Alarms Page

This page displays alarm status information:

  • PLL Alarm
  • Fans Alarm
  • HPA Alarm
  • Input Overdrive Alarm
  • RF Alarm
  • Temperature Alarm
  • ALC Alarm

Interface Setup Page

This page contains configuration-related parameters:

  • LED State
  • Serial Port
  • OpenBMIP Support

Notes

  • SNMP must be enabled on the device.
  • RF-related parameters depend on active transmission conditions.
Improve this page