Riedel Communications MediorNet
The Riedel Communications MediorNet connector is used to monitor the Riedel Communications MediorNet processor.
This connector uses SNMP to retrieve a list of cards of the Riedel Communications MediorNetProcessor. For each GPI slot, Link slot and Video slot, a connector is exported.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version | - | - |
| 1.0.1.x | Added smart-serial connection for Ember+ | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 1.00 |
| 1.0.1.x | 1.00 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - Riedel Communications MediorNet - Link Module - Riedel Communications MediorNet - Video Module - Riedel Communications MediorNet - GPI Module |
- |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP Connection:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device. The default value is public.
- Set community string: The community string used when setting values on the device. The default value is private
IP Connection
This connector uses a serial connection (Ember+ gateway) and requires the following input during element creation:
SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 9000).
How to Use
The element consists of the data pages detailed below.
Frame
This page displays information about the Riedel Communications MediorNet Frame, which houses the processor modules.
Slot Table
This page displays all the slots on the frame.
Link DVE Table
This page lists the link modules in the frame for which DVEs are exported and allows you to change the DVE names.
Video DVE Table
This page displays the video modules in the frame for which DVEs are exported and allows you to change the DVE names.
Gpi DVETable
This page displays the GPI modules in the frame for which DVEs are exported and allows you to change the DVE names.
Video IP (from range 1.0.1.x onwards)
This page displays the Video In IP and Video Out IP tables.