Riedel Communications MediorNet Platform
The Riedel Communications ST2110 - SDI Gateway is used to encapsulate or de-encapsulate SDI data from/to IP ST2110. This connector can be used to monitor the encapsulation and de-encapsulation process. Each process uses flows and formatting values that are relevant when executed. The connector is based on Embox3u and Embox6 device data.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
HTTP Main Connection
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 80).
- Device address: The bus address of the device. If the proxy server has to be bypassed, specify BypassProxy.
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
How to use
The element created with this connector consists of the following data pages:
- General: Contains general information about the device.
- Interfaces: Contains information about the interfaces that the device uses.
- Reference Clock: Contains information about the status and controls of the device reference clocks.
- Flows: Contains information about each flow type (video, audio, or ancillary).
- LLDP: Contains Link Layer Discovery Protocol (LLDP) information (i.e., chassis, port, and TTL).
- Devices: Contains devices information (label, type, node ID, etc.) and each device type table (Sources, Senders, and Receivers).
- Devices Flows: Contains device flow communication data (engine ID, type, packet counter, and sequence error counter).
- Ports: Contains port configuration data and ports telemetry (temperature, Tx power, and Rx power).
- SDI: Contains SDI configuration data for each SDI type (Input, Audio, and Output).