Rohde Schwarz AVHE100

The fully integrated and highly compact R&S AVHE100 headend solution for encoding and multiplexing minimizes complexity for terrestrial and satellite DVB systems. It is an IP-based system solution featuring all-in-one integrated encoding and multiplexing and using R&S CrossFlowIP technology.

About

This connector was designed to monitor the different properties of the R&S AVHE100 system.

Version Info

Range	Description	DCF Integration	Cassandra Compliant
1.0.0.x	Initial version	No	Yes
2.0.0.x	Version from Bayerischer Rundfunk	No	Yes

Product Info

Range	Device Firmware Version
1.0.0.x	Dolbyr Digital / Dolbyr Digital Plus Encoder Version 3.10.2 - Build 2971695
2.0.0.x	Dolby Version 1.1.5 - Build 2012-04-09

Exported connectors

Exported Protocol - Range 1.0.0.x	Description
Rohde Schwarz AVHE100 - AVS100	A separate connector that represents the AVS100 device.
Rohde Schwarz AVHE100 - AVG100	A separate connector that represents the AVG100 device.

Installation and configuration

Creation

SNMP Main Connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

• SNMP CONNECTION:

  • IP address/host: The polling IP of the device.

  SNMP Settings:

  • IP port: The IP port of the device, by default 161.
  • Get community string: The community string used when reading values from the device, by default public.
  • Set community string: The community string used when setting values on the device, by default private.

Usage - range 1.0.0.x

General

This page contains system information parameters, divided in several sections:

• System General: Description, Last Update, Operation Mode.
• Cross-Flow IP: Active System, Manual Select Mode, etc.
• Multisystem Redundancy: Mode, State, Sum Connection State, etc.

Objects

This page contains the Object Table as well as page buttons that provide access to the Device AVG DVE and Device AVS DVE tables.

Active Configurations

This page contains the Configurations Table, which contains the activated configurations. There are also page buttons that provide access to the Active Recoders and Active Mux tables.

NWA

This page contains the NWA table, which displays the active NWAs.

Input

This page contains the Input table, which displays the active inputs.

Output

This page contains the Output table, which displays the active outputs.

NTP

This page contains the parameters related to the configured NTP, including client-side and server 1 and 2 parameters.

Usage - range 2.0.0.x

General

This page contains system and DMA information parameters, i.e., System Name, Element ID, Element Name and IP Address.

Configurations

This page contains the Configurations Table.

Parameters

This page contains the Parameters Table.

System

This page contains additional system parameters, i.e., System Overall Status, Software Version and System License and SLA Status.

Automation

This page contains the Execution Automation Event and the Timestamp Automation Event parameters.