Rohde Schwarz TMV9 DAB Dual Drive
The R&S TMV9 transmitter is used for multiplexed Digital Audio Broadcasting in a Single Frequency Network (SFN). It consists of a source switch system, 2 exciters with 2 ETI inputs, a group of amplifiers, a transmitter controller unit (TCU), and an antenna system.
About
This SNMP connector is used to monitor and configure the Rohde Schwarz TMV9 Dual Drive transmitter.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | 22.0.1 |
Exported connectors
| Exported Connector | Description |
|---|---|
| TMV9 DAB Dual Drive - Exciter | In range 1.0.0.x, the transmitter has two exciters. For each exciter, a DVE element is exported. |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- IP port: The IP port of the device.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
General
This page displays general parameters related to the device, such as system information and control, software updates, device and product info, Tx common control, functions and notifications, GPS, UPS, date and time configuration and options management.
DAB Input
This page contains the DAB Input Notification table, the DAB Input Common table, the DAB Input ETI table and the DAB Input EDI table.
DAB Status
This page contains the DAB Status Notification table, the DAB Active Configuration table, the DAB Active Localization table, the DAB Active Modulation table, the DAB Active TII table, the DAB Status SFN table, and the DAB Status SFN Input table.
DAB Setup
This page contains the DAB Configuration table, the DAB Localization table, the DAB Modulation table, the DAB TII table, the DAB Setup SFN table, and the DAB Test table
DAB Dual Drive General
This page contains the general status parameters and the Exciter Switch Auto Status state parameter.
It also contains a page button that allows access to the General Event Enable and General Event Priority parameters.
DAB Dual Drive Exciter A
This page contains the Exciter A status parameters and the Exciter A Input A, Exciter A Input B and Exciter A Status state parameters.
It also contains a page button that allows access to the Exciter A Event Enable and Exciter A Event Priority parameters.
DAB Dual Drive Exciter B
This page contains the Exciter B status parameters and the Exciter B Input A, Exciter B Input B and Exciter B Status state parameters.
It also contains a page button that allows access to the Exciter B Event Enable and Exciter B Event Priority parameters.
Cooling
This page includes all pressure- and temperature-related parameters. It allows you to monitor the inlet and outlet temperature state, the coolant pressure and temperature state and the coolant temperature configuration.
Tx Transmitter
On this page, you can monitor the transmitter state and both monitor and configure the transmitter notifications and commands.
Tx Exciter
This page is similar to the Tx Transmitter page, displaying the Exciter Notification, Commands and State tables.
Tx Input Interfaces
This page contains a set of tables with information on all inputs, namely the Input Interfaces Notification, IP, TS Feed, General Setup and Monitor tables.
Tx Input SAT
This page displays all SAT information and settings for every input, in the Input SAT Feed Tuner, LNB, CAM, IP Output, General and Extras tables.
Tx Input Automatic
This page contains the Automatic Notification and Automatic Configuration tables, which allow full control over input automatic configuration.
Tx Frequency Regulation
This page contains the Notification and Setup tables, allowing you to both monitor and configure the frequency regulation parameters. Additional information is also available in the Frequency Regulation State Table.
Tx SFN
Similar to the Tx Frequency Regulation page, this page contains the SFN Notification and Setup tables, as well as the SFN State monitoring table.
Tx Precorrection
This page contains a Notification table as well as Linear and Non-Linear Setup and State tables. It also includes the Crest Factor Reduction table for both monitoring and control.
Tx Output Stage
On this page, you can monitor and configure the Notification and Commands tables, as well as monitor the State table.
Tx Amplifier
On this page, you can configure the amplifier status notifications and monitor the State and PMx tables.
Tx Presets
On this page, you can load and save presets for every transmitter.
Tx RF Sensors
This page contains the Tx RF Sensors Notification Table as well as the general Tx RF Sensors Table. The latter allows you to monitor and configure a large set of sensor-related parameters.
MTx
This page displays the MTx Notification Table. In addition, it contains all information about NPlus1, including the NPlus1 Configuration and Status monitoring, which can be accessed via page buttons.
DVE Modules
This page contains the DVE Table. The DVEs representing the exciters are created with the data in this table.
Web Interface
This page provides access to the web interface of the Rohde Schwarz TMV9 DAB Dual Drive transmitter. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.