SA xDQA
This connector is a QAM modulator, which allows you to monitor alarms and configure QAM settings on the device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.1.1.x [SLC Main] | Monitoring and setting of QAM frequencies. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.1.1.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.1.1.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
On the General page, you can monitor the name, location and the QAM Open Streams Channel, as well as the GBE Input parameters. This page also contains a button to reboot the device.
On the Configuration page, you can set the QAM Freq. Channel 1 parameters and all 6 of the GBE QAM RF Output parameters. This page also displays the QAM Freq. Channel 2 parameters.