SEE Telecom eAcsys Tx Ds
The SEE Telecom eAcsys Tx DS is a transmitter. This connector allows you to monitor and control this device via SNMP communication. The native web interface of the device is also available through the connector.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version. | - | - |
| 1.1.0.x [SLC Main] | Release version. | 1.0.0.x | - |
| 2.1.0.x | Revised layout, ranges, and timers. | 1.1.0.9 | - |
| 3.0.0.x | Custom version (VOO). | 1.1.1.8 | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | N/A |
| 1.1.0.x | N/A |
| 2.1.0.x | N/A |
| 3.0.0.x | N/A |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.1.0.x | No | Yes | - | - |
| 2.1.0.x | No | Yes | - | - |
| 3.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
- Bus address: The bus address of the device (range: 1 - 16).
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element created with this connector consists of the following data pages:
- General: Displays general information about the device, such as the Serial Number, Software Version, and Temperature.
- Optical: Displays information about the optical functionality of the device, such as the Laser Bias Current, the Measured Laser Output Power, and the Laser Temperature.
- RF: Displays information about the RF functionality of the device, such as the RF Power, the Attenuator, RF Overdrive, Adjustment Mode.