SSC BR23L
Satellite Systems (SSC) Model BR23L is a fully agile satellite tracking receiver designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or other SCPC carrier.
About
The SSC BR23L connector uses a serial protocol to communicate with the BR23L device.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | L.4A32 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
- Bus address: The bus address of the device. If the bus address is empty, communication goes through the RS-232 protocol, otherwise RS-485 is used.
How to use
This connector consists of only one page, the General page. This page contains the monitored system parameters used in the satellite carrier tracking process, the carrier input frequency, the current reference level, the current DC reference voltage and the carrier tracking status.