SYes GPS Receiver
This connector monitors the activity of the SYes GPS Receiver, a professional high-precision GPS receiver designed for broadcasting purposes.
This device provides a high number of time and reference signals (10x5/10 MHz and 10x1 pps) with the possibility of full redundancy in all relevant modules (dual radio receiver, dual oscillator, and dual power supply).
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | Version: 3; Code: FW469180234 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection - Main
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
- The General page displays general information about the device such as the General Status, Device Mode, Active Module, and Board Temperature. The subpages display additional information about the Hardware and Firmware.
- On the Configuration page, you can set up the configuration of the device: Switch Mode, External Reference, 10 Mhz Output Power, Label, Holdover, Traps, and PPS settings.
- The GNSS page displays information related to the GNSS (Global Navigation Satellite System) configuration and modules. The device has two modules: Module A and Module B.
- The Alarms page has alarm parameters associated with the PSUs, Fan modules, Board Temperature, Inputs, and Outputs.