Satcom Technologies SCR14000BU Ku-Band Up Converter
The SCR14000BU is a KU-Band upconverter. This connector allows you to monitor and configure such devices. The device is comprised of several modules, which include a Reference Module, Radio Frequency Module, Synthesizer Module and Converter Module.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 1.21 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
How to use
On the General page of the element, you will find status information and settings in the following main sections:
- System Information: Contains basic information, such as firmware versions, operational time, etc.
- Unit Information: Contains status information and configured values for the device, including the status of the modules.
- Hardware Status: Contains status information related to the amperage, voltage and temperature of the device.
- Faults: Displays the fault list of the unit, with a great number of different points being checked for status (displayed as Ok or Not Ok). These include Ethernet Controller, Power Supply, Front Panel, Synthesizer, Fans, etc.
On the Configuration page, you can configure the Radio Frequency Gain, Radio Frequency Output and Mute Control. You can also reset the unit or its faults there.