Seiko Time Server Pro. TS-2950
The Time Server Pro. TS-2950 is an appliance to supply the exact time to computers and servers connected to a network.
The Seiko Time Server Pro. TS-2950 connector can be used to monitor Time Server Pro. TS-2950 servers.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 6.2.10 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | Yes | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
IP Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 22).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The General page contains information about the time server.
The PTP-related data can be found on the PTP Base Clock and PTP Base Clock Port pages.
The GPS and GPS Satellite data are polled via the SSH connection. This means that in order to get these data, you must make sure the SSH user name and password are filled in on the General page.