Sencore CRD 4900
Sencore CRD 4900 is a high-density modular frame designed to accommodate up to 20 cards of the openGear Multi-Definition product family.
This connector contains information about the frame and its overall status (temperature, power supply, buzzer, etc.).
No information about the specific cards can be retrieved through the Frame SNMP agent, nor is this provided in the MIB. Instead, individual elements representing the cards can be created if the appropriate connectors are available.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | CRD4900-1.1.0 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 161).
- Bus address: The bus address of the device (default: byPassProxy).
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
General
This page displays general information about the frame, such as the Version, Location, Contact, etc.
It also displays status information such as the Power Supply Status, Temperature, Buzzer Status, Front Door Status, etc.
Network
This page contains the network detail parameters, such as IP Address, Gateway, etc.
Time
This page contains the time detail parameters, such as NTP Server IP Address, Date Time Mode, etc.
Trap Config
This page contains the trap configuration events. Here you can configure whether a trap is sent out when a particular event happens.