Sennheiser EM904
The SennheiserEM9046 is a wireless microphone sound system equipped with bell pack transmitters, handheld transmitters and an 8-channel receiver system that covers the UHF range from 470 to 798 MHz.
The EM9046 consists of an analogue output module with 16 analog output channels, a digital output module that supports 24 AES output channels and 2 audio output modules. The receiver itself integrates up to 8 RF transmitters and 2 antenna boosters.
The connector monitors the different modules configured in the EM9046 device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | EM9046_4_0_0_12916 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP of the device, e.g., 192.168.56.201.
- Type of port: By default UDP/IP.
- IP Port: By default 45.
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
How to use
General: Displays basic information about the device such as the vendor, firmware version, serial number, etc.
Overview: Contains a tree view of the slots and corresponding output modules.
Output Modules:
Analog output modules table: The analogue output module EM9046AAO supports 16 output channels.
- Digital output module table: The digital output module EM9046DAO supports 24 output channels.
Detachable Components:
The detachable devices table contains information about connected external devices, i.e., antenna boosters and RF transmitters.
- The RF transmitters table contains up to 8 transmitters.