Sittig DVA
The Sittig DVA connector is used to monitor the status of the Sittig DVA.
About
The connector uses SNMP to retrieve the monitoring data from the Sittig DVA.
The Sittig DVA contains status information for each Sittig device per location. This connector is thus very simple, because it is only used for monitoring.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2.0 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | No | - | - |
Installation and configuration
Creation
SNMP connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Usage
General
The General page displays some information about the device. The Summary Status and Summary Errors are also displayed. These parameter indicate the overall status and amount of errors in the system.
Devices
The Devices page contains the Devices and the Locations table.
The Devices table has an overview of each device that is monitored by the Sittig DVA. The key of each entry is built in following format: [Location]:[Description]. For each of the devices, the general status and errors are being monitored. Some extra status parameters are available for QS Servers and QC Clients.
The Locations table contains an entry for each location with its status and errors.
Web Interface
The web interface can be used to log in to the Sittig DVA device. Note that the client machine has to be able to access the device, otherwise it will not be possible to open the web interface.