Smartgrid PDU General
This connector can be used to gather and view information from the device Smartgrid PDU.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | N/A |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | Yes | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The General page displays general information about the device, such as the Device ID, Up Time, System Name and Temperature.
There is also a page with PDU status information and a page with information on the power of the device (circuit A and B), including the Voltage, Frequency and Active Power.
On the Network page, you can find the network settings of the device and enable the LITE functionality.
DataMiner Connectivity Framework
The 1.0.0.x range of the Smartgrid PDU General connector supports the usage of DCF.
DCF can also be implemented through the DataMiner DCF user interface and through DataMiner third-party connectors (for instance a manager).
Interfaces
Fixed interfaces
Physical fixed interfaces:
- Circuit A: For parameters related to circuit A type in.
- Circuit B: For parameters related to circuit B type in.
Dynamic interfaces
Physical dynamic interfaces:
- Outlets: Outlet table type out.
- Remote DCFs: Remote connections type inout.