Snell Wilcox CVR900
The Snell Wilcox CVR900 is an HD & SD standards converter and format converter with synchronization capability. It provides multi-rate 3Gb/s HD/SD inputs and outputs and is capable of providing upconversion, downconversion and crossconversion.
It also handles embedded, AES and analog audio. It can do aspect ratio conversion and color space conversion.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version, enables monitoring and setting of device parameters. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 1.00.a |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
- IP port: The IP port of the destination (default: 161).
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: public).
Initialization
No extra configuration is needed.
How to use
On the General page, you can find general information about the device. Alarm monitoring can be enabled on the parameters related to signaling and hardware to ensure that signal drops are noticed quickly.
On the Initial Setup page, you can set the most important IP settings on the device. This page also contains information on the front panel and the version.
The other pages of the connector contain the settings related to the names of the pages. For example, the Video page contains the settings related to the video source.