Table of Contents

Snell Wilcox IQADA00

The IQADA00 is a single/dual-channel analog audio distribution amplifier. It provides dual analog inputs with up to five outputs per input, or a single analog input with up to ten outputs.

About

This connector provides status data for input 1 and input 2. It is also possible to set certain control parameters.

Version Info

Range Description DCF Integration Cassandra Compliant
1.0.0.x This version treats the boards contained within the chassis as DVEs. No Yes
2.0.0.x This version should be used to monitor each board separately (i.e., each board is represented by a single independent element). No Yes

Product Info

Range Supported Firmware Version
1.0.0.x Unknown
2.0.0.x 5.3. .6

Configuration

Connections - Range 1.0.0.x

SNMP main connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

  • IP address/host: The polling IP of the device.
  • Device address: Not required.

SNMP Settings:

  • Port number: The port of the connected device, by default 161.
  • Get community string: The community string used to read from the device. The default value is public.
  • Set community string: The community string used to write on the device. The default value is private.

Connections - Range 2.0.0.x

SNMP main connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

  • IP address/host: The polling IP of the device.
  • Device address: The ID of the board to be monitored.

SNMP Settings:

  • Port number: The port of the connected device, by default 161.
  • Get community string: The community string used to read from the device. The default value is public.
  • Set community string: The community string used to write on the device. The default value is private.

Usage

General

This page contains general parameters related to the device: Serial Number, Software Version, etc.

Configuration

This page contains gain and silence parameters. There are also buttons to preset and restart the unit.

Log

This page contains status and control parameters for input 1 and input 2.

Roll Track

This page contains roll track parameters for index and index B.

Improve this page