Snell Wilcox IQFDA30
The Snell Wilcox IQFDA is an optical amplifier.
About
This connector allows the management of the Snell Wilcox IQFDA30 using a serial connection.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 5.0.7 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
Serial main connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP of the device, e.g., 192.168.14.10.
- IP Port: The IP port of the device, e.g., 2050.
- Bus address: The Unit Address and the Unit Port, e.g., 26.02 for Unit Address 0x26 and Unit Port 0x02.
Usage
General Page
This page contains the Display parameter and general status parameters.
The page also provides an overview of miscellaneous log settings, such as OS Version, Firmware version, etc.
The log settings for the parameters can be configured via the Log Config... page button.
Inputs Page
This page provides an overview of the input settings.
The Config Restart... page button provides an overview of restart settings.
Outputs Page
This page provides an overview of the output settings.
SFP Output Page
This page provides an overview of the SFP output settings.
System Memory Page
This page provides an overview of the system memory. The context menu allows you to save, recall, clear and rename a memory slot.
Logging Inputs Page
This page provides an overview of the input log settings.
The log settings for the parameters can be configured via the Log Config... page button.
Logging SFP Page
This page provides an overview of SFP log settings.
The log settings for the parameters can be configured via the Log Config... page button.
Rolltrack Page
This page provides an overview of RollCall-related settings.
System Setup Page
This page contains information about the card, e.g., Product, Software Version, Build.
The page also contains buttons that allow you to restart the device (Restart), and set the device back to the factory settings (Factory Default) or default settings (Default Settings).
SFP Setup Page
This page contains information about the SFP setup.
Connection Info Page
This page displays information related to the connection, e.g., Unit Address, Unit Port.
Web Interface Page
This page allows the user to access the original web interface of the device.
Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.