Snell Wilcox IQHIP00 SNMP

The Snell Wilcox IQHIP00 SNMP connector is an SNMP based connector used to monitor and configure the Snell Wilcox IQHIP00.

About

The Snell Wilcox IQHIP00 SNMP provides a monitoring interface to the Snell Wilcox IQHIP00 Video Server device.

Installation and configuration

Creation

The Snell Wilcox IQHIP00 SNMP is an SNMP connector. The IP has to be configured during creation of the element.

SNMP CONNECTION:

IP address/host: The polling IP of the device, e.g., 10.11.12.13.

SNMP Settings:

Port number: The port of the connected device, by default 161.
Get community string: The community string in order to read from the device. The default value is public.
Set community string: The community string in order to set to the device. The default value is private.

Usage

General Page

The General page displays the general information of the device, for example Hardware and Software Versions, System Uptime, etc.

Blask/Blackish Page

This page displays configurable information about the Black and Blackish Levels.

Freeze Page

This page presents configurable information regarding Freeze and Stilish State.

Video Monitor Page

This page presents information regarding the Video State.

Closed Captions Page

This page presents information regarding the Closed Captions State.

Ancillary Data Page

This page presents information regarding the Ancillary Data.

WSS/VI AFD Page

This page presents information regarding the WSS State and VI State.

Audio Data Page

This page presents information regarding the Audio Data Type and Audio Data Bit Depth.

Audio Level Detectors Page

This page presents information regarding the Audio State.

Audio Level Indicators Page

This page presents information regarding the Embedded and Audio Channel Levels.

Audio Likeness Page

This page presents information regarding the Audio Likeness.

Audio State Page