Socomec UPS
The Socomec UPS version is an SNMP connector that communicate with Socomec UPS to get information from the device.
About
A SNMP connection is used in order to successfully retrieve and configure the device's information.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | No |
| 1.1.0.x | Version Update | No | No |
| 1.2.0.x | Version Update | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.1.0.x | 2.06 |
| 1.2.0.x | 2.08 |
Installation and configuration
Creation
SNMP connection:
- IP address/host: The polling IP of the device.
SNMP settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device. The default value is public.
- Set community string: The community string used when setting values on the device. The default value is private.
Usage
Once created, the element can be used immediately, There are 4 pages available.
General
This page contains some information about the device, also some configuration and network parameters.
Input/Output
Here you will find the voltage, current and frequency of the inputs and outputs of the device.
Bypass/Battery
At this page you see he voltage, current and frequency of the bypass, here are also some parameters available about the battery.
Alarm Page
This page contains all the alarms.