Sony NMI Device
This is an SNMP connector that is used to monitor and configure the Sony NMI interface equipment.
The information on the parameters is retrieved via SNMP communication.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version. | - | - |
| 1.0.1.x | Correction to discrete values. | 1.0.0.5 | External sets. |
| 1.0.2.x [SLC Main] | Added DCF support. | 1.0.1.3 | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2.01 (NMI-LSI-Firmware) |
| 1.0.1.x | 2.01 (NMI-LSI-Firmware) |
| 1.0.2.x | 2.01 (NMI-LSI-Firmware) |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.0.1.x | No | Yes | - | - |
| 1.0.2.x | Yes | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element created with this connector has the following data pages:
- General: This page displays system information, including the System Time, System Description, System Location, System Contact, System Up Time, and other general parameters.
- Network: This page displays the Interfaces table. This table displays the operational status of the interfaces available in the workstation. This operational status can change based on incoming traps.
- Product Information: This page displays the Product Information, Modules, and Remote Maintenance tables.
- Traps: This page displays the Traps Destination table.
- Alarms: This page displays the Error Status table. This table is both polled and updated based on traps. The table is cleared when a "Coldstart" trap is received.
- NMI: This page contains specific NMI interface data such as Protocol Version, System ID, Control Point ID, IP Checksum Errors, UDP Checksum Errors, TCP Checksum Errors, NMI Discard Packets, and NMI Checksum Last Change. It also contains page buttons that provide access to additional NMI data.