Sony PWS-110SC1 - XVS-8000
The Sony PWS-110SC1 is a Vision Mixer Controller to which different cards can be attached:
- Vision Mixer System Interface Units: MKS-X7700/X2700/X7099
- Vision Mixer Processor: XVS-6000/7000/8000/9000
- Vision Mixer Panel: ICP-X7000
- Vision Mixer Menu Panel: MKS-X7011
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version. | - | - |
| 1.0.1.x [SLC Main] | Support for monitoring of Sony 2110 devices. | 1.0.0.24 | Pages renamed. NMI table renamed to IP IV Interface table. Columns of Device table renamed. |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | V2.60 |
| 1.0.1.0 | V2.60 |
Configuration
Initialization
This connector is used by DVEs that are automatically created by the parent element. No user input is required.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
Range 1.0.0.x
The element created using this range of the connector has the following data pages:
- Status: This page displays detailed status information on the module, including the Device ID, Manufacturer, Model, Destination, Serial Number, Category, Version, Model Suffix and Version Suffix.
- Alarms: This page displays the Error Statuses connected to this module.
- NMI: This page allows you to connect this Vision Mixer Processor to the selected NMI Interface. Note: Only 1 NMI element can be connected to 1 slot on the device. You can check which NMI element is connected to which slot via the NMI table on the main element.
- Product Info: This page displays the Module table. This table displays the modules for this slot.
Range 1.0.1.x
The element created using this range of the connector has the following data pages:
- Status: This page displays detailed status information on the module, including the Device ID, Manufacturer, Model, Destination, Serial Number, Category, Version, Model Suffix and Version Suffix.
- Alarms: This page displays the Error Statuses connected to this module.
- IP IV Interfaces: This page allows you to connect this Vision Mixer Processor to the selected NMI or Sony 2110 Interface. Note: Only 1 NMI element can be connected to 1 slot on the device. You can check which NMI element is connected to which slot via the NMI table on the main element.
- Product Info: This page displays the Module table. This table contains the modules for this slot.