Sony ST2110 Device
The NXLK-IP50Y SDI-IP Converter Board has eight 1.5/3G-SDI bi-directional ports plus dual SFP28 (25Gb Ethernet) ports for network connection redundancy. It is compatible with ST 2110-20/30/40 streaming formats and allows very low latency signal conversion, making it ideal for integration in real-time IP Live production environments.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Supports monitoring of standard Sony MIBs Supports monitoring of Sony Pro IP Live MIBs | - | - |
| 1.0.2.x [SLC Main] | Added DCF support | 1.0.1.3 | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 1.10 |
| 1.0.2.x | 1.10 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.0.2.x | Yes | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element created with this connector has the following data pages:
General: This page displays system information, including the System Time, System Description, System Location, System Contact, System Up Time, and other general parameters.
Network: This page displays the Interfaces table. This table displays the operational status of the interfaces available in the workstation. This operational status can change based on incoming traps.
Product Information: This page displays the Product Information, Modules, and Remote Maintenance tables.
Traps: This page displays the Traps Destination table.
Alarms: This page displays the Error Status table. This table is both polled and updated based on traps. The table is cleared when a "Coldstart" trap is received.
IP Live LSM: The KPIs related to the LSM connection.
- IP Live NMOS: The KPIs related to the NMOS status.
- IP Live ST2059: The network information related to ST2059.
- Video Streams: The KPIs related to the Tx and Rx of the video streams.
- Audio Streams: The KPIs related to the Tx and Rx of the audio streams.
- Metastreams: The KPIs related to the Tx and Rx of the metastreams.
- Network Interfaces/Network Statistics: KPIs related to the IP Live network interfaces.
Notes
In the Sony LEO solution, all the elements running this connector can be monitored by the other elements that run the connectors Sony Signal Processing Unit, Sony PWS-4500, and Sony PWS-110SC1. This is done using the monitors class library.