Sony XVS-G1
The Sony XVS-G1 is a vision mixer controller to which different cards can be attached: the ICP-X1116, ICP-X1124, ICP-X1216, and ICP-X1224.
About
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version | - | - |
| 1.0.1.x [SLC Main] | Added DCF support | 1.0.0.3 | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.0.1.x | Yes | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default value public.
- Set community string: The community string used when setting values on the device, by default value private.
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element created using the 1.0.0.x range of the connector has the following data pages:
- General: This page contains general information, such as the System Description, System Up Time, System Contact, Name, and Location. It also displays an overview of the OSI Model of the availability of each layer, as well as the Agent and Switcher MIB Versions.
- Network: This page displays the Interfaces and Address Translation tables. The Interfaces table displays the operational status of the interfaces available in the workstation. This operational status can also change based on incoming traps.
- Product Information: This page displays the Product Information, Modules, and Remote Maintenance tables.
- Traps: This page displays the Traps Destination table.
- Alarms: This page displays the Error Status table. This table is cleared when a "Coldstart" trap is received.
- Configuration: This page displays the CTRL1, 2, 3, and 4 configuration settings and the SWR1 and SWR2 configuration settings. Each has a Status; this can be enabled or disabled. When a resource is created, these statuses will be taken into consideration. When the status is enabled, the resource will contain this parameter; otherwise, it will not contain this parameter.
- XVS Control: This page allows you to check which XVS G1 element is connected to which the XVS G1 via the Control Interfaces table. There is a Resubscribe button to reset all the created subscriptions.
- Agent MIB: This page displays the Agent MIB Categories and Agent MIB Products tables.
- Switcher: This page displays the Agent MIB Categories and Agent MIB Products tables.
- Product Information: This page displays the Switcher Reference Information, Switcher Temperature Information, Switcher Fan Information, Switcher Power Sensors, Switcher SSD Information, and Switcher Battery Information tables.