Specialty Microwave Corp 13966-506
The TLT Coaxial Switching Panel, Part No. 13966-506 consists of a logic panel used in satellite communications earth stations. The TLT Coaxial Switching Panel provides local indication and commands and using a serial interface provides remote indication and commands of four coaxial switches.
About
The Specialty Microwave Corp connector allows for quick monitoring of front panel information and configuration of switch position through the use of a serial connection.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | Yes | Yes | - | - |
Configuration
Connections
Serial main connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Direct connection:
- Baudrate: Baudrate specified in the manual of the device, e.g., 9600.
- Databits: Databits specified in the manual of the device, e.g., 7.
- Stopbits: Stopbits specified in the manual of the device, e.g., 1.
- Parity: Parity specified in the manual of the device, e.g., No.
- FlowControl: FlowControl specified in the manual of the device, e.g., No.
Interface connection:
- IP address/host: The polling IP of the device.
- IP port: The IP port of the device.
- Bus address: The bus address of the device. The default value is 49, with a range of 33 to 126.
Usage
General
Here you can configure the device's two Switch Positions. Status parameters such as the Power Supply Status 1 and 2, Local Indicator, and TLT Fail Status are also displayed.