Synology RS820RP+
Synology RS820RP+ is a 1U rackmount 4-bay network-attached storage solution designed for effective and centralized data management. It is equipped with a 4-core processor and 2 GB DDR4 memory, expandable up to 18 GB. The PCIe 3.0 slot supports an optional 10 GbE add-in network interface card, or an M2D18 M.2 SSD adapter card4, where the M.2 NVMe/SATA SSD cache can be used to boost system random IOPS.
This connector uses SNMP to poll data from Synology RS820RP+ based on its web interface layout.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | DSM 6.2-25426 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
- Bus address: The bus address of the device.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The layout of the connector is similar to that of the web interface of the Synology RS820RP+. It also provides the same monitoring and configuration features.