T-VIPS TVG450
The T-VIPS TVG450 connector is an SNMP-based connector used to monitor and configure the T-VIPS TVG450.
About
The TVG450 provides a monitoring interface to the T-VIPS TVG450 Video Gateway device.
This connector works with firmware versions 3.4.4 and 3.8.24.
Installation and configuration
Creation
The T-VIPS TVG450 is an SNMP connector. The IP needs to be configured during creation of the element.
SNMP CONNECTION:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string in order to read from the device. The default value is public.
- Set community string: The community string in order to set to the device. The default value is private.
Usage
General Page
The General page displays general information on the device, for example Product Name, System Uptime, .
Some of these parameters can also be changed, like for example the Device Name.
Video Page
This page displays tables with information regarding VBI and Audio.
Encoders Page
This page displays tables with information regarding Encoders.
Decoders Page
This page displays tables with information regarding Decoders.
SDI Ports Page
This page displays tables with information regarding SDI Ports.
IP Status Page
This page displays tables with information regarding IP Transmission and IP Receiving.
Web interface
This page can be used to access the web interface of the device.