Table of Contents

Tandberg MEM General

The Tandberg MEM General is a Multiplex Element Manager, which controls Evolution 5000 compression equipment.

About

The connector polls the device via SNMPv2 calls. Traps are not implemented.

Version Info

Range Description DCF Integration Cassandra Compliant
1.0.0.x [Obsolete] Initial version No Yes
1.1.0.x [SLC Main] Complete redesign to meet the current standards (2005 style tables, etc.) Yes Yes

Product Info

Range Supported Firmware Version
1.0.0.x 4.32 Rev1
1.1.0.x 4.13

Installation and configuration

Creation

SNMP connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

  • IP address/host: The polling IP of the device.

SNMP Settings:

  • Port number: The port of the connected device, by default 161.
  • Get community string: The community string used when reading values from the device, by default public.
  • Set community string: The community string used when setting values on the device, by default private.

Usage

General

This page contains general information about the device, such as the Product Name, MIB version and Administrative State.

Streams

This page contains the Streams Table, with information such as the Multiplexer Stream Output and Active Multipler.

Mux

This page contains the Mux Table, with information such as the Health Status, Communications Status and Availability.

Modulator

This page contains the Modulator Table, with information such as the Health Status, Communications Status and Availability.

Encoder

This page contains the Encoder Table, with information such as the Type, Health Status, Availability and Description.

Module (1/2)

This page contains the following tables:

  • BMI Table: Displays the Health Status and Description.
  • Video Table: Displays the Health Status, Availability and Description.
  • Audio Table: Displays the Health Status, Availability and Description.

Module (2/2)

This page contains the Sync Table, the Async Table and the Text Table, which each display the Health Status, Availability and Description.

TSP

This page contains the TSP Table, with information such as the Mux Card Slot, Physical Port and Health Status.

IRD

This page contains the IRD Table, with information such as the IRD Comms Status, Health Status, Availability and Description.

Relay (1/2)

This page contains the following tables:

  • Encoder Relay Table: Displays the Encoder Index and Health Status.
  • TSP Relay& Table: Displays the TSP Index and Health Status.
  • Mux Relay Table: Displays the Mux Index and Health Status.

Relay (2/2)

This page contains the following tables:

  • Stream Aux Relay Table: Displays the Relay Number and Health Status.
  • Aux Relay Table: Displays the Relay Number and Health Status.

Router Chassis

This page contains the Router Chassis Table, with information such as the Chassis Type, Health Status, Comms Status, Availability and Description.

IPE

This page contains the IPE Table, with information such as the Health Status, Availability and Description.

Traps

This page contains Trap settings, such as the Trap Polling Interval and the Trap Generation parameter.

Notes

Version 1.0.1.x is not backwards compatible with the previous version. It is an entirely new version.

Improve this page