Tandberg TT1260 SNMP

The Tandberg TT1260 SNMP connector is an SNMP based connector used to monitor and configure the Tandberg TT1260. The device settings can be monitored and changed using the TT1260 SNMP connector.

About

The TT1260 SNMP provides a monitoring interface to the Tandberg TT1260 IRD device.

Installation and configuration

Creation

This is an SNMP connector. The IP need to be configured during creation of the element.

SNMP CONNECTION:

• IP address/host: the polling IP of the device eg 10.11.12.13

SNMP Settings:

• Port number: the port of the connected device, default 161
• Get community string: the community string in order to read from the device. The default value is public.
• Set community string: the community string in order to set to the device. The default value is private.

Usage

Main View Page

The General page displays the general status information of the device, for example BER Rate, Audio Status, Video Status.

Quick Configuration Page

This page allows to configure parameters like Input Frequency, Input Search Range, Input Symbol Rate, etc.

General

The General page displays general information of the device, for example Control Mode, Device Address.

Demodulator

This page displays information about the Demodulator.

Services Page

This page displays information about the Services.

Video Page

This page presents tables with information regarding Video.

Audio Page

This page presents tables with information regarding Audio.

IP Module Page

This page presents tables with information regarding the IP Module, such as Gateway, RTP Protocol, Encapsulation...

Web Interface

This page can be used to access the web interface of the device.