TeamCast Vyper DVBS/S2 SNMP
This connector retrieves information from a DVB-S/DSNG/S2 modulator via SNMP and makes it possible to configure certain parameters.
About
With the TeamCast Vyper DVBS/S2 SNMP connector, you can retrieve status information from a TeamCast Vyper DVBS/S2 modulator and set configuration parameters.
Version info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version | - | - |
| 1.1.0.x | New firmware (see below) | 1.0.0.1 | Unknown |
| 1.2.0.x | New firmware (see below) | 1.1.0.1 | Unknown. |
| 1.3.0.x | New firmware (see below) | 1.1.0.1 | Old trend data will be lost |
Product info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | S200 |
| 1.1.0.x | S100, S110 |
| 1.2.0.x | S120 |
| 1.3.0.x | S132 |
System info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.1.0.x | No | Yes | - | - |
| 1.2.0.x | No | Yes | - | - |
| 1.3.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The IP address of the device, e.g., 194.206.71.180.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, e.g., public.
- Set community string: The community string used when setting values on the device, e.g., private.
How to Use (1.0.0.x - 1.2.0.x)
General
This page displays important information such as the device temperature, the selected reference clock and the modulation type.
There are also several page buttons that allow you to configure the device, retrieve software and hardware information, view the current state of a firmware update, and review and configure the network configuration of the control and data ports.
Modulator
This page displays status information regarding the modulator: frequency, output power, alarm mute status, bit rate, DVB-S2 and DVB-S configuration, etc. Several of these parameters can be edited.
Status
This page displays global state information by indicating when alarms occur, etc.
DVB-S2 Stream Configuration
On this page, you can configure the input stream type, as well as settings related to the chosen input stream type (single stream or multi stream).
How to Use (1.3.0.x)
Inputs
This page contains three page buttons that allow you to monitor and configure all inputs of the device and also configure the input related alarms.
Outputs
This page contains three page buttons that allow you to monitor and configure all outputs of the device and also configure the output related alarms.
General
This page displays important information such as the device serial number, product type, hardware and software versions, temperature, hardware and software status.
There are also several page buttons that allow you to monitor and configure several generic features of the device, namely clock synchronization, ethernet, TSoIP, profile, carrier ID, dualcast, firmware update, temperature, relay, SNMP, time, log, license, power supply, GPS, redundancy and fan.
Modulator
In this page you can configure generic modulator configurations such as standard and baudrate. You can also go deep into DVB-S, DVB-S2, DVB-S2X, BISS, pre-correction and NCR configuration page buttons for more detailed configuration.
Also in this page you can monitor generic modulator parameter such as ideal Es/No, Spectral Efficiency and ideal Eb/No. You can also go deep into multi-stream, DVB-S2X, BISS, pre-correction and NCR monitoring page buttons for more detailed monitoring**.**
Alarms
In this page you can monitor generic alarms status of the device such as temperature status, hardware and software status, system clock status and you can also go deep into generic alarm configuration page button to configure these alarms.
Also in this page you can configure and monitor all the input and output related alarms and some generic device related alarms such as clock alarms, power supply alarms and fan alarms.