Teleste AC3000 SNMP
This connector is the SNMP version of the Teleste AC3000 (serial connector).
About
With this connector it is possible to monitor Teleste AC3000 devices with SNMP.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | Unknown |
Installation and configuration
Creation
The Teleste AC3000 SNMP is an SNMP connector. The IP needs to be configured during creation of the element.
SNMP CONNECTION
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default: public.
- Set community string: The community string used when setting values on the device, by default: private.
Usage
General Page
This page displays some general information of the device such as Element Settings, Status Information. The Element Settings section, displays some generic information related to the element such as Name, Structure etc.
Module Page
In this page, we display tables with information regarding the modules. These tables include, Module Table, Module Detail Table and Module Status Table respectively.
Event Log Page
In this page we display the Event Log table along with few other details related to the Event Logs.
Forward Path Page
In this page we display the values referent to the Forward Path. In the Forward Path Settings section, the user will be able to make configure parameters such as Band, Status, Type etc. Similarly, routing related settings can be configured within the Forward Path Routing section. This page also contains Level Detector page button. In this page we display the Level Detector Table.
Return Path Page
Similar to the Forward Path Page, In this page we display the values referent to the Return Path. In the Return Path Settings section, the user will be able to make configure parameters such as Band, Status, Amplifier Type etc. Similarly, routing related settings can be configured within the Return Path Routing section. This page also contains Level Control and Automatic Ingress Blocking page buttons. In this page we display the Level Control Table.
Transponder Page
In this page, we display Receiver Settings and Transmitter Settings.
Web Interface Page
In this page we display the web interface of the device.