Teleste ACE8 SNMP
ACE8 is an intelligent node with one active output, which may be split internally in two. It offers a high output level (Umax 138 QAM/111.5 dBμV) and supports 1.2 GHz downstream and up to 204 MHz upstream frequencies.
This connector uses an SNMP connection to poll data from the ACE8 device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | A3.3 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the ACE8 SNMP device.
- Device address: Not required.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
How to Use
The Alarm Limits and Status pages contain the most important parameters for monitoring.
The Forward Path and Forward Path Settings pages contain settings related to the optical receivers.
The Return Path and Return Path Settings pages contain settings related to the return transmitters.
The Transponder page contains information and settings related to the transponder.
Note
Changing the communication settings or device groups on the Transponder page may cause the element to go into timeout for a couple of seconds.