UPC Poland Environment Platform
This is an SNMP-based connector used to gather and display available data from the UPC Poland Environment Platform.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | N/A |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
On the General page, you can find general information such as High Fuel level and Coolant Level, as well as general settings for the circuit breaker and parameter settings.
The Configuration page displays circuit breaker and parameters information for each network block.
On the Output page, you can find information about the Circuit Breaker Output 1 and 2.
On the Additional Parameters page, you can find additional information about the device such as Air Temperature, Dew Point, Air Relative Humidity, etc. This page also displays a block of reserved parameters and shows the status of the main QS3 circuit.