Utah Scientific 100 X
About
The Utah Scientific 100 X is a connector that control and presents the router in a Matrix view.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | Yes | Yes |
Configuration
Connections
This connector uses both a serial and SNMP connection.
Serial Connection
The serial communication retrieves and updates the crosspoints for the matrix. It requires the following input during element creation:
- Type of port: TCP/IP
- IP address/host: the IP Address of the device
- IP port: This is the IP Port of the device on which you want to communicate.
- Bus address: The router level. The matrix shows the routing crosspoints of the specified level.
SNMP
The SNMP communication is used to poll the device status. It requires the following input during element creation:
- IP address/host: The polling IP of the device.
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
The connector has the following data pages:
- Main View: Displays the matrix.
- Device Status: Shows general information about the device.
- Web Interface: Links to the web interface of the device