Vector Boostral 7920 Manager Child

This connector is used to monitor and control the Vector Boostral 7920 Manager Child card.

It is used as a monitor for all parameters associated with a certain device. The parameters of these devices are polled in a sequential manner. This means that if one device goes into timeout, all devices must wait until all parameters have timed out before the parameters of the next device are polled.

About

An SNMP connection is used in order to successfully retrieve and configure the information of the device.

This connector is automatically generated by the connector Vector Boostral 7920 Manager.

Product Info

Connector Version	Device Firmware Version
1.0.0.x	Unknown

Installation and configuration

Creation

This connector is used by DVEs that are automatically created by the parent element Vector Boostral 7920 Manager. No user input is required.

Usage

General

This page contains general configuration settings and a page button that links to a window where you can find three kinds of power voltages.

Optical

This page contains two panels. The Receiver panel shows optical power information, whereas the Transmitter panel displays the state of each transmitter.

Forward And Return

This page contains user-defined settings for different kinds of attenuation, as well as low and high thresholds.

Modem

This page contains four tables with information regarding the modem device to which they are connected.