VizionR Pandora HbbTV
The VizionR Pandora HbbTV enables the monitoring of MPEG-2 transport streams. This connector uses the SNMP interface to receive data from the device and updates critical parameters using SNMPv2 traps.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2014.09.24 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
How to use
This connector allows you to monitor general information and status information of the device. It also allows you to control the entire SNMP configuration. It contains a list of the possible alarm types and the status of the different signals. Finally, it also allows you to send commands to the device.