Williams Sound LoopGuardian - Amplifier
The Williams Sound LoopGuardian - Amplifier connector enables the user to control and monitor individual device (DVE) settings.
About
An HTTP connection is used in order to successfully retrieve and configure the information of the device.
This connector is automatically generated by the connector Williams Sound LoopGuardian (range 1.0.0.x).
Product Info
| Connector Version | Device Firmware Version |
|---|---|
| 1.0.0.x | 0.10.3 |
Installation and configuration
Creation
This connector is used by DVEs that are automatically created by the parent element. No user input is required.
Usage
General Device Information
In this page, general information about this device is present under the section Device Information. This page also includes all the Digi Loop Series Firmware Versions for the particular device. For example, Main CPU Firmware Version, Bootloader Version etc.
Use the Amplifier Status page button to learn key status and Temperature related information regarding the Loop A (Amplifier 1), Loop B (Amplifier 2).
Global Controls
This page consists of User Presets table and Loop Information table. In the User Presets table, the user will be able to make various changes to User Preset IDs such as changing the Preset Name, enable/disable it's display on user interface and saving the configuration. Apart from these, some key system configuration information like Sleep Delay Time, Priority Input Control and Network IP Address Assignment are present here. Furthermore, the user will be able to change and monitor Loop Operating Mode and Headphone Output Volume related settings under the Global Controls Information section.
The user can also choose to Reboot the device by clicking on the Reboot button.
Input Channel Controls
On this page, the user will be able to monitor and control General Input, Equalizer Input and Compressor Input Channel Controls for this particular device.
Output Channel Controls
Similar to the Input Channel Controls page, the user will be able to monitor and control General Output, Equalizer Output and AGC Output Channel Controls for this particular device.
Connection Information
This page consists of the important Network Information related to Ethernet Interface, Multi-Loop Monitor and Dante Interface.