Witbe Experience Center SNMP
This connector is intended to catch traps from the Witbe Experience Center and list them in a history table.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. Collects traps in Alarms table. | - | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
Traps will be automatically captured from any OID and placed in the Alarms table on the General page.
Notes
Important: The connector is designed to have a fixed number of bindings. If a trap doesn't have the correct number of bindings, the trap will be discarded.
The connector will only take traps from the IP configured in the element configuration.