WorldCast Systems APT AoIP
This connector can be used to monitor a WorldCast Systems APT AoIP device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [Obsolete] | Initial version | - | - |
| 1.0.1.x [SLC Main] | Removed Unit Temperature parameter. | 1.0.0.2 | Unit Temperature parameter no longer available. |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.0.1.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
How to Use
The element displays information about the device on multiple pages and subpages:
General: Displays general information such as the CPU load, software revision, and device name
Status: Displays the connection status of the device. Links to the following subpages:
GPIO: Displays information about output relays and optic inputs.
- Network: Displays information about the available Ethernet ports and the firewall rules, among others.
- Performance: Displays information about the audio levels and the ongoing streams.
- Audio Codec: Displays information about the audio codecs in use.
Configuration: Links to the following subpages:
Connection: Displays information about the active profile in use.
- Audio: Contains audio, advanced routing, and audio alarm information.
- Aux Relay: Contains information about baud rates, relay control modes, input sources, etc.
- Streams: Indicates which streams are active.
- Alarms: Contains information about alarms of the device.