WorldCast Systems Audemat DAB Probe
The Audemat DAB Probe is a complete DAB radio monitoring solution to perform advanced signal analysis, on-site and in the broadcast coverage area.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version. TDF only (DataMiner 7.5) with custom traps. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 3.1.2 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
- Bus address: The bus address of the device.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element consists of the following data pages:
- General: Contains general info about the device.
- Channels: Lists the current channels connected to the device.
- Current alarms: Lists the current active alarms in the device.
- Service: Contains the Info Service table, with information about the alarm status of each channel (based on traps).
Notes
The 1.0.0.x connector range was created according to TDF requirements and must be compatible with DataMiner 7.5.