WorldCast Systems FM Single Drive IRT
The WorldCast Systems Ecreso FM Single Drive IRT is an FM transmitter.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | N/A |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The General page displays the Transmitter status, RF, Local Mode, Faute (Fault Status), and Warning status. Use the Refresh Table button to trigger the immediate polling of these parameters. You can also define a Description for the single table entry.
There is a page button that will display the Trap configuration for each of the previously mentioned parameters. As these parameters are not polled automatically, use the Refresh Traps button to update them.
In addition, Current Audio is displayed. With Select Audio, you can set one of the following options for the audio: Undefined, Auto, Line 1, Line 2, Aip, Tuner, Mpx 1, Mpx 2, Aip 1, Aip 2, Tuner 1, Tuner 2, Player and Generator. The Select Audio parameter is polled after you click the Refresh Table button.
The line 1 and line 2 alarm are also displayed on the General page together with the alarms for Mpx 1 and Mpx 2.
Note: A received trap will only trigger a parameter update in case the difference between its event counter and the previous trap event counter is more than 10.